Trelleborg Engineered Systems Australia

Subscribed

You have successfully submitted your enquiry. Someone from our company will respond ASAP

Structural Movement and Acoustic Solutions for Rail and Infrastructure

Address
515 Zillmere,
Zillmere Q 4034,
Brisbane,
Australia
Phone
Fax Number
Share

Structural Movement and Acoustic Solutions for Rail and Infrastructure

Trelleborg is a leading supplier of vibration control solutions for rail systems and now offers LH embedded rail solutions with advanced polymer technology for the construction of urban railway and metro networks.

We are global leaders in the flowing:

  • Ballastless and acoustic solutions for metro rail
  • Structural noise and vibration isolation for performing arts centres
  • Expansion joint systems
  • Bridge and infrastructure bearings
  • Ballast matt and Elastoseal for waterproofing bridges
  • High-speed, heavy-duty, quick lift rail crossings for freight lines
  • Waterproofing for culverts, rail bridges and buildings

Based in Brisbane, Australia, we manufacturer engineered rubber and polymers used in industrial solutions. Focusing on the infrastructure construction and the major tansport sectors of shipping, air and rail, Trelleborg uses a range of polymers, metals and composites to provide solutions that damp, seal and protect demanding environments.

Vector embedded rail system delivers cost-effective ground-borne vibration mitigation for light rails and metros.
High-speed rubber level crossing.
Trelleborg Metalastik air springs - Lantau, Hong Kong.
Trelleborg Metalastik air springs - higher load capacity (up to 180kn), variable stiffness of the bear springs, long service life of more than ten years.
Ballast mats for rail bridges, rail crossings and Elastoseal.
Trelleborg Metalastik air springs - Pyrmont, Sydney.
The Vector fully embedded system provides durable, resilient support and electrical isolation with a design life in excess of 30 years.
Why do this?
When you can lay modular track with no ballast.

Our range also includes primary suspension and anti vibration solutions for rail associated rolling stock. Trelleborg is a specialist in the design and manufacture of products to reduce and mitigate low frequency vibrations that contribute to a noisy environment and uncomfortable ride on trains and trams.

Polymers for embedded rail track

Our new high-performance polymers now make it possible to construct embedded rail track with very high vibration isolation performance together with excellent electrical insulation to protect against the problems of stray current.

Trelleborg is also able to offer superior performing ‘pour in’ polymers that allow seamless expansion or contraction between concrete and steel structures. Our team in Australia are dedicated to servicing the ANZ and SE Asia regions, and making it a global centre for contactors and consultants for heavy haul rail metro and city light rail solutions.

Embedded rail track with vibration isolation

Recent advances in high-performance polymers have opened up the possibility to construct embedded rail track with very high vibration isolation performance and good electrical insulation. Vector is such a system, based on a unique combination of a pre-moulded elastomer boot fitted to the rail over an optional inner electrical insulation coating applied to the rail.

This approach ensures that Vector can reliably deliver the most stringent electrical isolation requirements for a modern light rail system as well as provide robust and durable rail fixing. The ability to tailor the rail boot design and easily adjust material properties allows Vector to rival the vibration isolation performance of floating slab track while offering much lower construction costs for both light metro rail and heavy haul rail track.

Vector can be installed using a range of track constructions including Trelleborg’s own non-metallic sacrificial installation beam system proven on the Gold Coast Rapid Transit project. The system can also be applied in association with bi-block sleepers to produce a shallow track construction. Successful installations have been made over the past ten years in the UK, Europe and South Africa with most recent installations in Milan, Durban, Manchester and Birmingham.

About Trelleborg

Trelleborg is a worldwide business which has some 140 manufacturing facilities and 22,000 employees worldwide, so we are able to draw on a global in-house expertise to ensure the minimum of risk to your rail sector requirements in the region.

Projects

  • Inland Rail, Australia

    The Inland Rail project will directly link Melbourne and Brisbane via regional Victoria, New South Wales, and Queensland.

  • Shepparton Line Upgrade

    The Victorian Government initiated an upgrade to the existing Shepparton railway line, as part of a massive ongoing revival of public transport system in Victoria.

Address
515 Zillmere
Zillmere Q 4034
Brisbane
Australia

Email address
Phone
Fax Number
Address
Trelleborg Industrial AVS
1 Hoods Close
Leicester
LE4 2BN
United Kingdom

Email address