In addition to the existing certificates for the compliance of EMC characteristics according to EN...
MTM Power’s PCMDNI300 series showcases a new range of DC / DC converters without galvanic isolation that can be installed as decentralised power supplies in vehicles and for supplying closed sub-systems in rolling stock.
The wide input voltage range of 28VDC-160VDC enables the use of the converters on batteries with 36V to 100V. The devices can be operated in a temperature range of -40°C to 70°C without derating and have an excellent efficiency of up to 96%.
The completely vacuum encapsulated converter (EP 1 987 708, US Patent No 8.821.778 B2) is protected against condensation, conductive dust and other environmental conditions and available with output voltages of 12VDC or 24VDC.
Due to the rugged design with contact base plate cooling (BPC) technology, it is possible to reduce the power loss via heat dissipation through the mounting plate while increasing the lifetime of the devices at the same time.
As an option a self-cooling version with integrated heat sink is also available. A remote control input on the primary side allows a low-power switch-on of the output voltage at high loads.
For the use of standard circuit breakers corresponding to the nominal power of the PCMDNI300 and for avoiding contact damages at upstream switching equipment, an active inrush current limit with reverse polarity protection is installed in the input circuit of the converter.
The series is constantly short-circuit protected and needs no ground load. Further features are SMD-technology, automatic 100% final test and 100% burn-in test. The converter is connected with industrial plugs optional with screw or spring clamp connectors.
MTM Power® GmbH has developed the new DC/DC converter series PCMDS250 for universal applications in...
Through years of intensive research, MTM Power® has developed a worldwide unique potting technology: the...