Bel Power Solutions Announces Next Generation 0RCY Series Regulated Bus Converter in an Eighth Brick Footprint

Bel Power Solutions and Protection has announces the 0RCY-F0S10B, a next-generation regulated bus converter with 45-56VDC input / 10.2VDC @ 49A output and offering up to 500W of highly efficient power in an eighth brick footprint.

This converter is intended to provide isolation and step down to generate a regulated intermediate bus for the purpose of powering non-isolated point-of-load (POL) converters.
The isolated DC-DC converter incorporates digital control, efficient secondary side synchronous rectifiers and a thermal management system.

Thermal performances are extremally good because thermal design guarantees an efficient dissipation. Equipped with standard protection features such as under voltage lockout (UVL), over temperature protection (OTP), over current protection (OCP), short circuit protection (SCP) and overvoltage protection (OVP), Bel Power units also come standard with primary side on / off and secondary side Power Good signal indicators.

The output of the converter includes the droop function, which allows the modules to operate in parallel with high output current sharing precision.

The 0RCY-F0S10B is IPC-9592B Class 2 and Category 2 rated as well as IPC-9592B derating compliant. Models all come with UL/CSA/IEC 60950-1, 2nd +A2 version (pending) approvals.

The 0RCY-F0S10B is currently in stock with both Mouser and Digi-Key. For more detailed information, fill out the enquiry form on this page.