Join Our Newsletter - Get important industry news and analysis sent to your inbox – sign up to our e-Newsletter here
X

DC/DC Converters Feature 20kV Isolation

DC/DC Converters Feature 20kV Isolation

ABSOPULSE Electronics’ DIO 120 Series of dc/dc converters were developed for powering electronic circuits floating on several kilovolts of operating voltage. They are typically used for high power gate drivers and similar applications in oil and gas, mining, railway and industrial environments.

The 120W converters accept a single input 24Vdc or 48Vdc and deliver 12Vdc, 15Vdc or 24Vdc (5A current limit). They are tested for corona (partial discharge) extinction at a minimum of 10kVrms and Hi-Pot tested for 20kVrms. The feedback system on the primary side employs a special sensing circuit instead of optical components, further enhancing reliability. Typical operating voltage potential between primary and secondary is 2-5kVrms.

This value depends on the specific application and contamination class, and is limited by the creepage distance of 76mm (3.0"") on the PCB. Generous design headroom, 20kV input/output and output/chassis isolation, comprehensive protection circuitry and the use of transformers engineered with the company’s proprietary technology further contribute to system reliability.

These convection cooled units are rated for operation over a -20°C to 50°C temperature range for full specification. They are filtered to meet EN55022 Class A conducted and radiated requirements with wide margins and comply with UL 508 and equivalent industrial safety standards. The open-frame format has a footprint of 102 x 305 mm and maximum component height is 70mm.

More About This Company